Minutes, IBIS Quality Task Group April 29, 2025 12:00-13:00 Eastern Time (09:00-10:00 Pacific Time) ROLL CALL Siemens EDA Randy Wolff *, Weston Beal * Arpad Muranyi Teraspeed Labs Bob Ross Zuken USA Lance Wang Intel Corp. Michael Mirmak The Mathworks Graham Kus Micron Justin Butterfield Everyone in attendance marked by * NOTE: "AR" = Action Required. ------------------------------- MINUTES ------------------------------------- Randy Wolff conducted the meeting. Weston Beal recorded the minutes. Call for IBIS related patent disclosures: - None Review of previous meeting minutes: Minutes from the 01 APR 2024 meetings were reviewed. Randy Wolff moved to approve the minutes. Weston Beal seconded. Without objection the minutes were approved. Call for opens: none AR review: - Randy will present the bug253 to the open forum to approve the classification of Severe, High priority. Done New ARs: - Randy will present bug254 to the open forum for approval the classification. - Randy will request the bug report (254) to be posted on the web site. Discussion: a. New IBISCHK7.2.1 draft bug254 “AMI Reserved Parameter Repeater_Type erroneously reported as missing” The origin of this issue is from a TI model. The IBIS file and AMI file did not have the repeater model information. Randy added the relevant information in the AMI and IBS files. Arpad then tested the model and found the bug. The DLL issued an error if some of the required keywords that should be Usage Info were not Usage In. Changing the Usage to In allowed the DLL to run the simulation, but then the parser issues the error that the Repeater_Type is not found. This is a corner case. The parser catches the actual error about the Usage In, but then issues a secondary error about the Repeater_Type missing. The severity is set to moderate because the error can be misleading. The priority is set to low because it is unlikely to occur and is easy to fix in the AMI file. Tabled topics (no discussion without motion): - none Weston moved to adjourn. Randy seconded. Without objection, the meeting ended. Meeting ended: 12:20 pm ET Next meeting scheduled when needed